Ultrasonic Food Processing and Cutting Products

Converts line voltage into a 20, 30, or 40 kHz signal that is sent to the converter via a coax cable.  Typically they are remote mounted in equipment electrical panels.

Converts the generator signal into mechanical motion through the use of piezoelectric crystals approximately 20 u of amplitude peak to peak).  Stainless sealed converter can be cleaned in place.

Used to maintain, decrease or increase the amplitude of the cutting blade / horn.  Also acts as mounting point for integration.  Offered in titanium or aluminum.

Connected to the booster. They are made from titanium and can be used for guillotining or slitting products. Custom cutting blades are available.

Cuts up to 2" thick product.
Standard widths available:
6:, 6.5", 7", 8", 9", 10", 12" and 14"

Cuts up to 3" thick product. 
Standard widths available: 
6", 6.5", 7", 8", 9", 10", 12", and 14"

Cuts up to 6" thick product. 
Standard widths available: 
6", 8", 10", and 12"

Cuts up to 7" thick product.
Standard widths available: 
6", 8", 10", and 12"