Purchase Dukane products on-line

 


IAS Home Search About Dukane Contact Us

Application Notes
For DPC I Series Generators

These documents describe connector pin assignments and signal functions for various connectors on Dukane 15 kHz, 20 kHz, 30 kHz, 40 kHz, 50 kHz, and 70 kHz DPC I series generators.

AN110

System Inputs/Outputs Interface
Lists the connector pin assignments of the generator front panel I/O connector.  The input signal that is covered is Automation Input (Cycle Start).  Output signals that are covered include the Status Driver, Ultrasound Status, Overload Fault, Over Temperature Fault, and System Fault.  Example circuit connection diagrams are also included.

 

Adobe Acrobat Reader must be installed on your computer to view PDF files. To download a free copy, go to the Adobe download site.

Get Acrobat Reader

Please refer to DPC I manual (403-543) for further information

Ultrasonics Home   |  About Dukane  |   Downloads  |  Contact Us  |   Site Map  |  Search  |  Top

Dukane Corporation l 2900 Dukane Drive l St. Charles, IL  60174 l (630) 797-4900
Copyright 2001  Dukane Corporation.  All rights reserved.
Revised 03/30/2007